改性ABS
栏目:改性工程塑料 发布时间:2021-05-31 09:29
产品特征:符合ROHS标准、高机械强度、低收缩率、稳定的产品尺寸;低翘曲、优良的表面光泽度和加工热稳定性、阻燃等级符合UL-94 V0...

改性ABS  Modified ABS
产品应用:车用配件、家电与低压电器、办公与通讯设备、建筑建材、运动器械等注塑成型产品
改性特征:增强、阻燃、阻燃/增强
产品特征:符合ROHS标准、高机械强度、低收缩率、稳定的产品尺寸;低翘曲、优良的表面光泽度和加工热稳定性、阻燃等级符合UL-94 V0
Applications:Auto parts, home appliance parts and low-voltage apparatus, office and communication equipment, building materials, and sport equipment injection molding products
Modified Features: Reinforced, flame retardant and flame retardant/reinforced
Product Features: Comply with ROHS, and high mechanical strength, low shrinkage, stable size, low warpage, good surface glossiness, good heat stability for processing, and flame retardant grade is UL-94 V0
测试项目与标准
Test Items & Standards
阻燃型号
Flame Retardant
增强型号
Reinforced
项目Items 测试标准Standard 测试条件Test Condition 国际单位S.I. Units FRABSMIV-0 ABS-20GF
机械性能 Mechanical Properties  
拉伸强度Tensile Strength ASTM D638 50mm/min MPa 40 80
伸长率 Elongation ASTM D638 50mm/min % 15 <2
弯曲强度 Flexural Strength ASTM D790 2mm/min MPa 55 120
弯曲模量Flexural Modulus ASTM D790 2mm/min MPa 2150 5000
悬臂梁缺口冲击强度
Impact Strength, Izod notched
ASTM D256 3.2mm,23℃ J/m 120 65
洛氏硬度 Rockwell Hardness ASTM D785 R-Scale - 90 112
热性能 Thermal Properties  
热变形温度
Heat Distortion Temp
ASTM D648 0.45MPa,6.4mm 90 105
1.8MPa,6.4mm 80 90
电性能 Electrical Properties  
体积电阻率Volume Resistivity ASTM D257 - Ω.cm 1014 1016
其他 Others  
玻纤含量Glass Fiber -- -- % -- 20
比重Specific Gravity ASTM D792 23℃ g/cm3 1.17 1.18
收缩率Mold Shrinkage ASTM D955 23℃ % 0.4/0.6 0.2/0.3
吸水率Weather Resistant ASTM D570 23℃,24h % 0.04 0.08
阻燃性Flammability UL94 1.6mm class V0 HB
3.2mm V0 HB
建议加工工艺 Suggesting processing technology  
熔体温度Melt Temp   200-230℃ 220-245℃
料筒温度Barrel Zone Temp   180-230℃ 185-240℃
模具温度Mold Temp   30-60℃ 30-80℃
预干燥Pre-Dry Requirements     70-80℃                     2-4hr 80-90℃                 2-3hr
注:以上数值是根据实验室标准测定的代表数值,仅供客户参考,不作为质保承诺。  
Note: The above data is based on standard laboratory condition, for reference only, not for product warranty.